Convert feet to meters in one step - enter a number and get an instant result. Our feet to meter converter uses standardized factors, so your dimensions match drawings, cut sheets, and site specs. No sign‑ups, no slow pages - just clear numbers.

How the feet to meters calculation works accurately

For the international foot used worldwide, the conversion formula is simple: meters = feet × 0.3048, exact. Prefer a two‑way view? Feet = meters × 3.28084. For repeatable results in homework, shop drawings, and engineering notes, keep four to six decimals. You get speed and consistency in every calculation.

When to use the US survey foot factor

Some US surveying and GIS datasets still rely on the US survey foot, defined as 1200/3937 meters per foot. That ratio differs by roughly 2 parts per million from the international foot. Over small distances the gap is tiny, but on map‑scale work it accumulates. If your plat, State Plane Coordinate System file, or legal description says "US survey foot," multiply feet by 1200/3937 for meters (or by 0.3048006096 in decimal). This keeps coordinates aligned with geodetic benchmarks and avoids boundary creep.

Practical steps to convert and avoid errors

Identify the foot type in your source (international or US survey).
Apply the matching factor: 0.3048 or 1200/3937.
Note your assumption in the calculation log.
For long distances, validate against a benchmark.

Use our unit converter feet to meters when you need a quick check between specs. Finish conversions quickly while keeping precision tight.

Why all‑metrics.com delivers speed, coverage, and correctness

all‑metrics.com focuses on three things: speed, coverage, and correctness. Results appear as you type. Length, area, and more live in one place, so you don't juggle tabs. Formulas rely on accepted standards, which is essential when measurements affect cost or compliance.

Working with floor plans or landscaping? Jump from length to area with our square feet to square meters converter, keeping takeoffs consistent across the project. One workspace, fewer mistakes.

Examples you can trust: 10 ft × 0.3048 = 3.048 m. 90 ft × 0.3048 = 27.432 m. Using the survey ratio, 90 ft × 1200/3937 ≈ 27.43205486 m - an extra 0.00005486 m. Documenting which factor you used prevents confusion later.

We don't require registration, and the tool runs in your browser. If you need a fast back‑of‑the‑napkin estimate on site, multiply feet by 0.3 for a rough meter value, then refine with the exact formula at your desk. No barriers - just accurate results.

Feet (ft)	Meters (m)
0.01 ft	0.003048 m
0.1 ft	0.03048 m
1 ft	0.3048 m
2 ft	0.6096 m
3 ft	0.9144 m
4 ft	1.2192 m
5 ft	1.5240 m
6 ft	1.8288 m
7 ft	2.1336 m
8 ft	2.4384 m
9 ft	2.7432 m
10 ft	3.048 m
20 ft	6.096 m
30 ft	9.144 m
40 ft	12.192 m
50 ft	15.240 m
60 ft	18.288 m
70 ft	21.336 m
80 ft	24.384 m
90 ft	27.432 m
100 ft	30.480 m